Softail Rear Fender Mount Kit
Before you order — V-Twin tech note
Description
Softail rear fender mount kit allows the use of stock or custom fenders to be mounted and to move with spring arm. Kit can be used on axles with 3/4" outer diameter. Kit includes clamp set for Softail swingarm, upper tubes and two axle collars with tabs with 5/16" x 24 thread to mount strut or fender brace, which is used to replace existing spacers. Kit will allows sissy bars and/or fender braces to fit 3/4" axle assemblies, in or outside of the axle plates. Order related spacers separately.
*NOTE: Check belt clearance on left side. Trim fender relief if necessary.
*NOTE: Fender strut frame bars must be removed to fit this kit on 2008-2017 models.
*NOTE:Axle spools are one piece with tabs to secure struts. Solo seat is recommended as it will attach to the main frame and allow the swingarm to move. Sissy bars move with rear Softail section! Alternative is to replace shocks with struts then spoon seat can be mounted to the rear fender.
Specifications
- V-Twin number
- 51-0727
- Manufacturer
- V-Twin
- Sold as
- 1 - KIT
- Origin
- Imported
Goes with this part
V-Twin lists these alongside 51-0727 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.