Replica Front Fender Raw
Before you order — V-Twin tech note
- When mounting light it should be 3" from tip of light to end of fender.
Description
Spring Fork front fender has a raw finish with fender lamp holes. Features two piece spot welded skirt panels and 5/8" braces. Fender braces fit on the outside of the offset rockers. Check fender lamp mount hole location as they may not fit your particular front lamp location. The width of the braces are 5/8". Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation!
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0895
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Fender Width: 7-1/4"
- Style
- Stock
- 2026 catalogue pages
- 630
Goes with this part
V-Twin lists these alongside 50-0895 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.