Replica Rear Fender with Hinged Tail
Description
Replica rear fender with hinged tail and tail lamp cutout. Accepts late 1973-up large style tail lamp. Fender has turn signal bar indent and holes. Fender is for use with a 16" or 19" whee. Please mount to struts before painting or finishing. Check mount hole locations for struts. Holes may have to be enlarged for certain strut hole locations. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! The tail lamp mounting holes are 2-1/2" apart. The holes with indents are 6" apart, sitting 1" below the mounting holes and 1-3/4" outside of tail lamp holes.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0884
- OEM number
- 59604-69C
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Width: 7-1/4"
- Style
- Stock
- 2026 catalogue pages
- 632