Raw Spring Fork Front Fender
Description
Spring Fork front fender with raw finish, OE style rivets, a one piece seamless fender body, and narrow braces Fender braces fit on the outside of the offset rockers. We suggest pre fitting the fender prior to painting. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! The narrow braces are riveted into place and the side panels are pressed, instead of being spot welded into place.
*NOTE: The measurement between the 2 holes on the top of the fender where the fender mounts to the fork is 4-1/2". The inner diameter between the braces measures 11-5/8".
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0750
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Fender Width: 7-1/4"
- Style
- Stock
- 2026 catalogue pages
- 630