Message us and we will send you a photo before you order.Bobbed Rear Fender
Description
Raw oiled finish bobbed rear fender for rigid frame use only has narrow braces, as on 1936-1946 Knuckleheads and side skirts removed. Fender has holes for U-clamps, with the reinforcement plate spot welded in. Rear brace has original tab for chain guard mounting. We suggest pre fitting the fender prior to painting. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation.
*NOTE: The fender end is embossed with the factory design.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0435
- Manufacturer
- Wyatt Gatling
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Width: 7/8"
- Style
- Stock
- 2026 catalogue pages
- 631
Goes with this part
V-Twin lists these alongside 50-0435 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.