Raw Rigid Rear Fender Assembly
Before you order — V-Twin tech note
- Suggested to use with #50-0913 Rear Fender Trim Set.
- Fender hinge construction updated 2021.
Description
2022 New Production rigid rear fender with 5/8" wide braces includes tail section. The fender may require metal work for alignment and fit before primer and paint. Includes tube for wire tail lamp loom. Features a two piece spot welded skirt. Fender is fully assembled and riveted together with hinge. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinge fenders must be hand fitted at hinge and pin area. Alignment will have to be adjusted and tweaked to fit your components. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Includes replica rigid rear fender hinge, V-Twin 50-1243. Patience is required for proper installation! We suggest pre-fitting fender prior to painting.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Specifications
- V-Twin number
- 50-0363
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Large Loop Width: 1/2"
- Style
- Stock
- 2026 catalogue pages
- 631
- Other Notes
- Fender Width: 7-1/4"
Goes with this part
V-Twin lists these alongside 50-0363 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.