Rigid Rear Bob Fender
Description
Steel bobber style rigid rear fender without tail end hinge on the front fender section. Does not include 1/2 of the hinge in place of the fender half. Fender style has tail piece removed leaving half of the hinge in place, as on original Wild Ones of the 1950s would have used. Fender is narrow type with 3/4" wide braces, and is shipped with raw oiled finish. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation!
*NOTE: Bobbed fenders are hand made for custom applications. Fenders will require metal work and surface finishing before fitting and painting.
*Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs. **NOTE: Fender may require metal work for alignment and fit, please check before priming or painting!
Specifications
- V-Twin number
- 50-0283
- Manufacturer
- V-Twin
- Sold as
- 1 - KIT
- Origin
- Imported
- Measurements
- Fender Width: 7-1/4"
- Style
- Bobbed
- 2026 catalogue pages
- 631
Goes with this part
V-Twin lists these alongside 50-0283 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.