Message us and we will send you a photo before you order.18" Spring Fork Assembly Black
Before you order — V-Twin tech note
- Suggested to use with #49-2582 Rocker Set Black, for offset rockers.
- Suggested to use with #49-0335 Fork Rocker Set Black, for inside rockers.
- How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the length
- from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
- height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
- ease of installation.
Description
Black Spring Fork assembly is completely assembled with inner springs. Fork has a 7/8" non removable stem.
*NOTE: Rocker set not included, must order separately as required. For 45" Solo applications rockers with 3/8" axle holes are mounted on the inside of the fork legs using 7/16" threaded stud. For 1941-57 Servi-Car applications offset rockers are mounted on the outside of the fork with a bolt on 5-bolt lug star hub wheel and studs that are 1/2". Rocker mount holes are drilled to 7/16" but must be enlarged to 1/2" for offset rockers. The distance between the rockers measure 6.5". The distance between the rockers measures 6-1/2".
*NOTE: We measure from the top of the rear leg (tube), to the front axle center line. Front leg does not have provision to install ride control or shock assembly.
Specifications
- V-Twin number
- 49-2977
- Manufacturer
- V-Twin
- Sold as
- 1 - KIT
- Origin
- Imported
- Measurements
- Length: 18"
- 2026 catalogue pages
- 1229