22" Inline Spring Fork Assembly Black
You will also need another part
- Required *NOTE: Must order shock, ride control, axle assembly, top tree and bearing kit, as required.
- How we measure Spring Forks. NOTE: Measurement is from the triple tree where stem and lower bearing sits, to the axle position. This is the effective length, as it is the legnth
- from the lower bearing cup on the frame to axle. Installer can slide a pipe or solid bar thru the bearing cups and measure the length that may be needed for the desired frame
- height. This Spring Fork assembly accepts a 3/4" axle for custom applications. As rockers are not offset (as on replica Spring Forks). 1" stem utilized tapered bearings for
- ease of installation.
Description
Unit features parkerized springs, rockers, front and rear leg in black. This 22" assembly is 4" over stock length. Includes inner and outer springs, front and rear legs, 1" inline stem and offset outside mount rockers to utilze interchangeable wheel with lug bolt type drum and mechanical front brake drum, studs and bushings, spring rods with bushings. Some assembly may be required. These forks are replicas of the stock units with electric welded and brazed construction, and will accept all original style components and accessories for a detailed replica look. Top clamp, neck races and cone nut are not included.
*NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual wight, which will result in higher shipping costs.
*NOTE: We measure from the top of the rear leg (tube), to the front axle center line.
Specifications
- V-Twin number
- 49-2420
- Manufacturer
- V-Twin
- Size
- 32 inch
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Neck Stem: 1" x 24T
- Style
- without Shocks
- 2026 catalogue pages
- 795
Goes with this part
V-Twin lists these alongside 49-2420 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.