Stelling and Hellings Riser Set
Before you order — V-Twin tech note
Description
Stelling & Hellings style riser set will accept 1" handlebars and will fit with an original spring fork handlebar cut down from stock. Set is natural finish cast stainless steel. The Stellings and Hellings riser set are reproduced accurately from investment cast stainless steel. Riser mounting will require a stock set of handlebars to be cut down so there is a short stub remaining to accept the risers, the bar stub will be 1". The riser set is offset to mount to the bar end studs to make the riser stems parallel when installed. V-Twin offers a top tree with stubs as an alternative to cutting down a set of Spring Fork bars. Risers are cast of stainless steel, machined to specs and then polished. you will need the stock handlebar cut down to 11" overall width. Please measure twice, cut once!
Specifications
- V-Twin number
- 49-1927
- Manufacturer
- V-Twin
- Size
- 3-1/2 inch
- Sold as
- 1 - SET
- Origin
- Imported
- Measurements
- Height: 3-1/2"
- Style
- Straight
- 2026 catalogue pages
- 803