Polished Engine Breather Oil Collector
Before you order — V-Twin tech note
- Suggested to use with #31-2100 Chrome 1-1/2" Exhaust Hanger Clamp Set.
Description
Polished oil collector is designed to collect the oil mist from the breather hose which eliminates engine oil from collecting in air cleaner. On top is a high flow air filter that acts as a baffle allowing the oil and air to separate more efficiently and can easily be cleaned. On the bottom is a drain plug to allow drainage on a regular basis. A 90° barbed fitting fits breather hoses perfectly and includes chrome mounting billet clamp.
*NOTE: Order strp steel clamp if prefered, ehich can then be cut to length.
*NOTE: So the clamp does not slip when you tighten the fittings, it's suggested to use sand paper or a file to rough up the band where the clamp fits. (See diagram)
Specifications
- V-Twin number
- 40-0568
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Length: 2-3/4"
- 2026 catalogue pages
- 403
Goes with this part
V-Twin lists these alongside 40-0568 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.