Factory Sample 2" Stretch 5.5 Gallon Gas Tank
You will also need another part
- Suggested to use with #41-0113 Kreem Gas Tank Combo Kit.
- Required Required to use with #38-0878 Gas Tank Fuel Gauge Block Off Kit.
- Suggested to use with #35-0748 Petcock Adapter Fitting, for use on carburetor models.
- *NOTE: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Description
Gas tank accepts a left side petcock and has a fuel capacity of 5.5 gallons. Tank accepts left side fuel gauge. Block off plate required for use with carburetor type models. Requires sanding and primer before painting. The fuel line fitting as well as the petcock fitting should be masked or plugged during painting for easy installation of either petcock or fuel line. The back of the tank is stretched 2" and does not affect the mounts. Tank shows a welded seam for rear stretch extension. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Factory sample cover are brand new pre-production parts but have imperfections in the finished surface. Check threaded and bearing holes for excess plating before installation. There are no physical defects, such as cracks or holes, there will be cosmetic imperfections only. Sample parts may show marks from installation test and fitment.
Specifications
- V-Twin number
- 38-7223
- Manufacturer
- V-Twin
- Sold as
- 1 - EA
- Origin
- Imported
- Measurements
- Top Length: 18"
- Style
- Stretch
- Other Notes
- Front Width: 16"
- Front Tunnel Height: 7"
- Rear Tunnel Height: 1.5"
- Inside Width: 7-13/16"
- Back Curve Depth: 3-1/4"