XL York Electric Start Kit
You will also need another part
- Required Required to use with #18-3640 62 Tooth Clutch Drum with Starter Ring Gear Welded-On.
- Suggested to use with #32-1845 V-Fire XL Starter Motor.
- Starter motor housing, clearance motor case above sprocket case. Rear cylinder, clearance for starter as shown. Use die grinder or 4" Makita type disc grinder.
- Starter button may be used with starter button relay. VT #32-0472 Remote Starter Button, includes 3 button head screws. Install before installation.
- Mount bolts included for attaching alloy mount plate, 5/16" x 18 hex (2) with washers. Lug on starter is for 5/16" hole of 4 gauge batter cable, cut cable to length to connect
- directly to battery (+) terminal.
Description
Electric starter kit includes a 1.4kw compact starter with integral Bendix, solenoid and gear reduction. Kit also includes mount plate, 4 gauge cable, two 5/16 x 24 cable ends and heat shrink tubing. Electric starter kit includes a 1.4kw compact starter with integral Bendix, solenoid and gear reduction. Kit also includes mount plate and 2 gauge cable set. Natural finish starter and starter housing bolts directly to original starter drive port.
*NOTE: Requires (2) m5.08 x 2" countersunk flathead screws.
*NOTE: Check clearance between sprocket cover, oil tank and battery tray. Check clutch drum, must have 62 tooth ring gear installed, available separately. Starter motor accepts direct push button, included. Clutch drum with starter ring gear installed is available separately, V-Twin #18-3166, 1971-1980 XL clutch Drum with Ring Gear.
*NOTE: Your existing clutch drum must have the OEM Ring gear welded in placed.
Specifications
- V-Twin number
- 32-1642
- Manufacturer
- V-Twin
- Sold as
- 1 - KIT
- Origin
- Imported
- 2026 catalogue pages
- 977
Goes with this part
V-Twin lists these alongside 32-1642 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.