Replica Magneto Driveshaft Assembly
Before you order — V-Twin tech note
- Suggested to use with #32-1298 Magneto Assembly without Shaft.
- Suggested to use with #37-1027 Contact Screw Washer and #13-0168 Adjusting Screw Spring with this Round Outer Rotation Ring.
- Suggested to use with #36-0514 Magneto Tachometer Cable Driven Gear.
- Suggested to use with #36-0513 Black Magneto Tachometer Cable.
Description
Replica magneto driveshaft assembly comes assembled with hex top, gear and cast iron base with raw finish. Cast iron base with pre-installed bushings features a raw unplated finish.Pieces can be cadium or zinc.Drive ring and center hub are zinc plated. Assembly includes spiral to drive tachometer as original. Drive gear must be installed with a drive gear pin, when installing the pin press in and grind off excess length. Base will also accept a hex drive magneto unit, cable driven gear and 34-1/4" tachometer cable. Tachometer drive gear and cable available separately. Order magneto head separately. This is the real deal Sportster advance mechanism as the factory supplied from 1965-1970 on the XLCH models, Get Real! All components as original.
Specifications
- V-Twin number
- 32-1346
- Manufacturer
- Volt Tech
- Sold as
- 1 - KIT
- Origin
- Imported
- 2026 catalogue pages
- 1319
Goes with this part
V-Twin lists these alongside 32-1346 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.