3-5/8 Piston Set Standard Size
Description
Replica 3-5/8" bore piston set standard size with 8.5:1 compression ratio and an outer diameter of 3.6250" with .0025 clearance. Finished bore size is 3.6275. For installation of 3-5/8" cylinders after spigot holes have been enlarged. (See diagram for photos.) Can be used on 4-1/2" flywheels. Set includes Hasting 3 piece rings, 2 wrist pins, and 4 circlips. The pistons have a steel expansion control strut cast. Finished bore size is 3.6270". **Note: Run engine at moderate speeds for at least 500 miles, avoiding excessive running in lower gears, in order to properly break-in new pistons and rings.
*NOTE: All cast iron cylinders have same piston to wall clearance .0025 -.003.
Specifications
- V-Twin number
- 11-0283
- Manufacturer
- Motorshop
- Sold as
- 1 - SET
- Origin
- USA
- 2026 catalogue pages
- 537
Goes with this part
V-Twin lists these alongside 11-0283 — replacements, the parts commonly fitted at the same time, and supersessions. Check the fitment on each before ordering.